Order referenceAM88uv-wxyz-caaa | |
---|
u | flange code |
v | motor length |
w = 0 | smooth shaft with sealing ring IP 69K |
w = 1 | shaft with groove and feather key according to DIN 6885 and sealing ring IP 69K |
x | winding code A…Z |
y = 0 | 2-cable standard: feedback resolver |
y = 1 | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, single-turn, absolute position within one revolution, 18 bit resolution |
y = 2 | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, multi-turn, absolute position within 4096 revolutions, 18 bit resolution |
y = G | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, single-turn, absolute position within one revolution, resolution 24 bit, SIL2 (only in combination with AX8xxx-0200) |
y = H | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, multi-turn, absolute position within 4096 revolutions, resolution 24 bit, SIL2 (only in combination with AX8xxx-0200) |
z = 0 | without holding brake |
z = 2 | without holding brake, with sealing air connection |
z = 1 | with holding brake |
z = 3 | with holding brake, with sealing air connection |
c = 0 | motor connection via M23 speedtec® plug, cable length definable via aaa (1) |
c = 2 | direct connection for AX5000 up to 25 A (X13+X14), cable length definable via aaa |
aaa | length of the motor cable in decimetres |
| (1) For motor connection via an M23 speedtec® plug, a connecting cable ZK4500-80x3-xxxx must also be ordered in the required length. |
| All electric quantities are RMS values. |
| The options cannot be installed in the field. |